10 Reasons to Get Air Conditioning Repair
Almost anything could go wrong with your air conditioner, but there are a handful of common problems. Watch out for these as a sign to call for air conditioning repair.
1. Clogged Air Filter
Air filters pull dirt and debris out of the air before it goes through your air conditioning system. Once the filter gets full, it may not be as effective at keeping the other parts clean. Replacing it is an important part of air conditioner maintenance.
2. Dirty Evaporator Coil
The evaporator coil draws heat out of the indoor air. If it gets dirty due to a clogged air filter, it may collect condensation. Over time, it will stop working as well and can even accumulate ice.
3. Clogged Drain Line
Air conditioning units extract a lot of water out of the indoor air, which they release through a drain line. Like any other pipe, that line can get clogged with dirt or debris. If you don’t fix it, your system may shut down to protect the equipment.
4. Refrigerant Leaks
Low refrigerant makes it almost impossible for your system to run. You’ll usually encounter this problem through a refrigerant leak. Since refrigerant is a toxic substance and you may not know the location of the leak, hiring a professional is your best solution.
5. Faulty Thermostat
Sometimes your air conditioning unit is fine, but the thermostat is not. If your thermostat isn’t recognizing the right temperature or turning your system on correctly, you may need to schedule repair.
6. Compressor Failure
The compressor is one of the largest parts of your air conditioning system. When it fails, you will get ineffective cooling or none at all. Since you’ll pay the most to fix this part, prompt repair is key.
7. Broken Blower Motor
The blower delivers all the wonderfully conditioned air through your ductwork. When the blower motor breaks, you’ll feel warm air or no air at all. In most cases, the motor will let you know that it’s about to fail.
8. Failed Condenser Fan
Your condenser releases heat from the refrigerant, and the fan keeps the process going. If the fan breaks, the refrigerant cannot absorb more heat inside the home. As such, a broken fan can cause the entire system to stop functioning.
9. Faulty Relay or Contact
The relay on your air conditioning unit controls the start and stop of energy to the system. When the contacts on the relay start to go, you may notice unpredictable function of the machine.
10. Bad Capacitor
Your air conditioner needs a decent amount of energy to get started, and it relies on the capacitor to handle the power. The capacitor will start to wear out before it completely breaks, and you’ll need to schedule air conditioner repair right away.
Calling for air conditioning repair quickly is the best way to solve your cooling problems. For expert assistance, contact us at Essential Air Conditioning.